3TBIC - 3 Flute Taper Ball End Mills

(Showing 5 of 5)
  • Pre-hardened steel, Cast iron, Non-metallic materials
  • JCRO coating provides wear resistance improvement as well as avoid edge stress in various applications.
  • Suitable for special components with 3 axes and 5 axes sector such as impellers, blisks, tire profiles, turbine blades.
  • Available for simultaneous machining of roughing and finishing with only one tool.
Compare
  • 3 Flute Taper Ball Nose End Mills

    JJ Tools

    R3 x 6mm Ball Nose End Mills

    Diameter (R x D): R3 x 6mm
    Angle: 1°, 2°, 3°, 4°, 5°, 6°, 7°
    Length of Cut (L1): 19mm, 21mm, 22mm, 25mm, 27mm, 30mm, 31mm, 32mm, 40mm
    Overall Length (L): 75mm, 80mm, 90mm
    Shank Dia (d): 8mm, 10mm, 12mm
    £52.72 - £79.92 inc. VAT
    £43.93 - £66.60 ex. VAT
    Usually ships in 5-7 days
  • 3 Flute Taper Ball Nose End Mills

    JJ Tools

    R2 x 4mm Taper Ball Nose End Mills

    Diameter (R x D): R2 x 4mm
    Angle: 1°, 2°, 3°, 4°, 5°, 6°, 7°, 8°
    Length of Cut (L1): 18mm, 20mm, 21mm, 23mm, 26mm, 30mm, 32mm, 40mm
    Overall Length (L): 60mm, 70mm, 75mm, 80mm, 90mm
    Shank Dia (d): 6mm, 8mm, 10mm
    £40.00 - £68.40 inc. VAT
    £33.33 - £57.00 ex. VAT
    Usually ships in 5-7 days
  • 3 Flute Taper Ball Nose End Mills

    JJ Tools

    R1.5 x 3mm Taper Ball Nose End Mills

    Diameter (R x D): R1.5 x 3mm
    Angle: 1°, 2°, 3°, 4°, 5°, 6°, 7°, 8°
    Length of Cut (L1): 15mm, 18mm, 19mm, 20mm, 25mm, 26mm, 30mm, 32mm, 39mm
    Overall Length (L): 60mm, 65mm, 70mm, 75mm, 80mm
    Shank Dia (d): 6mm, 8mm, 10mm
    £40.00 - £68.40 inc. VAT
    £33.33 - £57.00 ex. VAT
    Usually ships in 5-7 days
  • 3 Flute Taper Ball Nose End Mills

    JJ Tools

    R1 x 2mm Taper Ball Nose End Mills

    Diameter (R x D): R1 x 2mm
    Angle: 1°, 2°, 3°, 4°, 5°, 6°, 7°, 8°
    Length of Cut (L1): 12mm, 15mm, 16mm, 19mm, 20mm, 22mm, 25mm, 29mm, 30mm
    Overall Length (L): 50mm, 55mm, 60mm, 70mm, 75mm
    Shank Dia (d): 6mm, 8mm
    £38.32 - £52.72 inc. VAT
    £31.93 - £43.93 ex. VAT
    Usually ships in 5-7 days
  • 3 Flute Taper Ball Nose End Mills

    JJ Tools

    R0.5 x 1mm Taper Ball Nose End Mills

    Diameter (R x D): R0.5 x 1mm
    Angle: 1°, 2°, 3°, 4°, 5°, 6°, 7°, 8°
    Length of Cut (L1): 12mm, 15mm, 18mm, 20mm
    Overall Length (L): 50mm, 55mm, 60mm
    Shank Dia (d): 6mm
    £38.32 - £40.00 inc. VAT
    £31.93 - £33.33 ex. VAT
    Usually ships in 5-7 days