Description
4 Flutes Non Symmetry End Mills for SUS
- Endmills for alloy steel, SUS, Ti/Ni base alloy, Inconel and hard to cut materials.
- JCRO coating provides wear resistance improvement as well as avoid edge stress in various applications.
- Minimize chattering by unequal flute spacing design.
- Excellent work surface finish by 4 flute and deep chip pocket.
- Minimize fracturing at high feed by high TRS fine WC grade.
Download technical specification .pdf
| Part Number | Diameter | Length of cut | Chamfer | Overall Length | Shank Dia | Select Part |
| D | L1 | C | L | d | ||
| 4SUE 100 150 S10 | 10 | 15 | 0.1 | 80 | 10 | Select |
| 4SUE 100 250 S10 | 10 | 25 | 0.1 | 80 | 10 | Select |
| 4SUE 100 300 S10 | 10 | 30 | 0.1 | 80 | 10 | Select |
| 4SUE 100 400 S10 | 10 | 40 | 0.1 | 90 | 10 | Select |
| 4SUE 100 500 S10 | 10 | 50 | 0.1 | 100 | 10 | Select |
| 4SUE 100 600 S10 | 10 | 60 | 0.1 | 110 | 10 | Select |
