4 Flute Taper Rib End Mills - 4RTE

(Showing 10 of 10)
  • End Mills for pre-hardened and hardened steel(HRc50~)
  • Excellent wear resistance from Si-based PVD coating.
  • Optimum for deep grooving with 2 bottom edges and 4 flutes.
  • Precise edge tolerance.
  • Excellent work surface finish.
  • Minimize fracturing by high TRS fine (0.5μm) WC grade.
Compare
  • 4 Flute Rib Taper End Mills - JJ Tools

    JJ Tools

    2.5mm Rib Taper End Mills

    Diameter (D): 2.5mm
    Angle: 0°30, 1°, 1°30
    Length of Cut (L1): 10mm, 16mm, 20mm, 25mm
    Overall Length (mm): 45mm, 50mm, 60mm
    Shank Dia (d): 4mm
    £26.53 - £31.20 inc. VAT
    £22.11 - £26.00 ex. VAT
    Dispatches in 5-7 days
    Choose Options
    Add to Your List
  • 4 Flute Rib Taper End Mills - JJ Tools

    JJ Tools

    2mm Rib Taper End Mills

    Diameter (D): 2mm
    Angle: 0°30, 1°, 1°30
    Length of Cut (L1): 10mm, 16mm, 20mm, 25mm
    Overall Length (mm): 45mm, 50mm, 60mm
    Shank Dia (d): 4mm
    £26.53 - £31.20 inc. VAT
    £22.11 - £26.00 ex. VAT
    Dispatches in 5-7 days
    Choose Options
    Add to Your List
  • 4 Flute Rib Taper End Mills - JJ Tools

    JJ Tools

    1.5mm Rib Taper End Mills

    Diameter (D): 1.5mm
    Angle: 0°30, 1°, 1°30
    Length of Cut (L1): 6, 10, 16, 20, 25mm
    Overall Length (mm): 45, 50, 60mm
    Shank Dia (d): 4mm
    £26.53 - £31.20 inc. VAT
    £22.11 - £26.00 ex. VAT
    Dispatches in 5-7 days
    Choose Options
    Add to Your List
  • 4 Flute Rib Taper End Mills - JJ Tools

    JJ Tools

    1.2mm Rib Taper End Mills

    Diameter (D): 1.2mm
    Angle: 0°30, 0°45, 1°
    Length of Cut (L1): 8mm, 10mm, 12mm, 16mm
    Overall Length (mm): 45mm, 50mm
    Shank Dia (d): 4mm
    £26.53 - £29.54 inc. VAT
    £22.11 - £24.62 ex. VAT
    Dispatches in 5-7 days
    Choose Options
    Add to Your List
  • 4 Flute Rib Taper End Mills - JJ Tools

    JJ Tools

    1mm Rib Taper End Mills

    Diameter (D): 1mm
    Angle: 0°30, 0°45, 1°
    Length of Cut (L1): 8mm, 10mm, 12mm
    Overall Length (mm): 45mm
    Shank Dia (d): 4mm
    £26.53 - £27.65 inc. VAT
    £22.11 - £23.04 ex. VAT
    Dispatches in 5-7 days
    Choose Options
    Add to Your List
  • 4 Flute Rib Taper End Mills - JJ Tools

    JJ Tools

    0.9mm Rib Taper End Mills

    Diameter (D): 0.9mm
    Angle: 0°30, 0°45, 1°
    Length of Cut (L1): 6mm, 8mm, 10mm
    Overall Length (mm): 45mm
    Shank Dia (d): 4mm
    £26.53 - £27.65 inc. VAT
    £22.11 - £23.04 ex. VAT
    Dispatches in 5-7 days
    Choose Options
    Add to Your List
  • 4 Flute Rib Taper End Mills - JJ Tools

    JJ Tools

    0.8mm Rib Taper End Mills

    Diameter (D): 0.8mm
    Angle: 0°30, 0°45, 1°
    Length of Cut (L1): 6mm, 8mm, 10mm
    Overall Length (mm): 45mm
    Shank Dia (d): 4mm
    £26.53 - £27.65 inc. VAT
    £22.11 - £23.04 ex. VAT
    Dispatches in 5-7 days
    Choose Options
    Add to Your List
  • 4 Flute Rib Taper End Mills - JJ Tools

    JJ Tools

    0.7mm Rib Taper End Mills

    Diameter (D): 0.7mm
    Angle: 0°30, 0°45, 1°
    Length of Cut (L1): 6mm, 8mm
    Overall Length (mm): 45mm
    Shank Dia (d): 4mm
    £26.53 - £27.65 inc. VAT
    £22.11 - £23.04 ex. VAT
    Dispatches in 5-7 days
    Choose Options
    Add to Your List
  • 4 Flute Rib Taper End Mills - JJ Tools

    JJ Tools

    0.6mm Rib Taper End Mills

    Diameter (D): 0.6mm
    Angle: 0°30, 0°45, 1°
    Length of Cut (L1): 4mm, 6mm
    Overall Length (mm): 45mm
    Shank Dia (d): 4mm
    £27.56 - £28.68 inc. VAT
    £22.97 - £23.90 ex. VAT
    Dispatches in 5-7 days
    Choose Options
    Add to Your List
  • 4 Flute Rib Taper End Mills - JJ Tools

    JJ Tools

    0.5mm Rib Taper End Mills

    Diameter (D): 0.5mm
    Angle: 0°30, 0°45, 1°
    Length of Cut (L1): 4mm, 6mm
    Overall Length (mm): 45mm
    Shank Dia (d): 4mm
    £27.56 - £28.68 inc. VAT
    £22.97 - £23.90 ex. VAT
    Dispatches in 5-7 days
    Choose Options
    Add to Your List