Description
3 Flutes Semi-Finishing & Roughing Corner Radius End Mills for Aluminum
- High speed semi finishing and roughing End Mills for Aluminum, AL alloys, non-ferrous and non-metallic materials
- JCRO coating provides wear resistance improvement as well as avoid edge stress in various applications.
- Minimize built up edge by chip braker and deep pocket design.
- Minimize fracturing by high TRS fine(0.5㎛) WC grade.
- Good surface integrity differently from competitor’s AL roughing End Mills
Download technical specification.pdf
| Part Number | Diameter | Length of cut L1 |
Effective Length L2 |
Overal Length L |
Shank Dia d |
Select Part |
| 3ARC 060 005 S06 | 6 X R0.5 | 9 | 15 | 65 | 6 | Select |
| 3ARC 060 010 S06 | 6 X R1 | 9 | 15 | 65 | 6 | Select |
| 3ARC 080 005 S08 | 8 X R0.5 | 12 | 20 | 70 | 8 | Select |
| 3ARC 080 010 S08 | 8 X R1 | 12 | 20 | 70 | 8 | Select |
| 3ARC 100 010 S10 | 10 X R1 | 15 | 25 | 75 | 10 | Select |
| 3ARC 100 020 S10 | 10 X R2 | 15 | 25 | 75 | 10 | Select |
| 3ARC 120 010 S12 | 12 X R1 | 20 | 30 | 80 | 12 | Select |
| 3ARC 120 020 S12 | 12 X R2 | 20 | 30 | 80 | 12 | Select |
| 3ARC 120 030 S12 | 12 X R3 | 20 | 30 | 80 | 12 | Select |
| 3ARC 160 010 S16 | 16 X R1 | 25 | 35 | 110 | 16 | Select |
| 3ARC 160 020 S16 | 16 X R2 | 25 | 35 | 110 | 16 | Select |
| 3ARC 160 030 S16 | 16 X R3 | 25 | 35 | 110 | 16 | Select |
| 3ARC 200 020 S20 | 20 X R2 | 30 | 50 | 110 | 20 | Select |
| 3ARC 200 030 S20 | 20 X R3 | 30 | 50 | 110 | 20 | Select |
