Description
2 Flutes 45 Helix Rib Ball End Mills for Copper
- Endmills for copper, copper alloy, nonferrous and nonmetallic materials.
- JCRO coating provides wear resistance improvement as well as avoid edge stress in various applications.
- Minimize fracturing by high TRS fine(0.5μm) WC grade.
- High speed, feed applicable by 45 degree helix and deep chip pocket design
Download technical specification.pdf
| Part Number | Diameter | Length of Cut | Effective Length | Overall Length | Shank Dia | Select Part |
| R x D | L1 | L2 | L | d | ||
| 2COB 030 080 S06 | 1.5R x 3 | 4.5 | 8 | 60 | 6 | Select |
| 2COB 030 120 S06 | 1.5R x 3 | 4.5 | 12 | 60 | 6 | Select |
| 2COB 030 160 S06 | 1.5R x 3 | 4.5 | 16 | 60 | 6 | Select |
| 2COB 030 200 S06 | 1.5R x 3 | 4.5 | 20 | 60 | 6 | Select |
| 2COB 030 250 S06 | 1.5R x 3 | 4.5 | 25 | 70 | 6 | Select |
| 2COB 030 300 S06 | 1.5R x 3 | 4.5 | 30 | 70 | 6 | Select |
| 2COB 030 400 S06 | 1.5R x 3 | 4.5 | 40 | 80 | 6 | Select |
