Description
4 Flutes Non Symmetry End Mills for SUS
- Endmills for alloy steel, SUS, Ti/Ni base alloy, Inconel and hard to cut materials.
- JCRO coating provides wear resistance improvement as well as avoid edge stress in various applications.
- Minimize chattering by unequal flute spacing design.
- Excellent work surface finish by 4 flute and deep chip pocket.
- Minimize fracturing at high feed by high TRS fine WC grade.
Download technical specification .pdf
| Part Number | Diameter | Length of cut | Chamfer | Overall Length | Shank Dia | Select Part |
| D | L1 | C | L | d | ||
| 4SUE 040 060 S06 | 4 | 6 | 0.04 | 60 | 6 | Select |
| 4SUE 040 120 S06 | 4 | 12 | 0.04 | 60 | 6 | Select |
| 4SUE 040 160 S06 | 4 | 16 | 0.04 | 60 | 6 | Select |
| 4SUE 040 200 S06 | 4 | 20 | 0.04 | 70 | 6 | Select |
| 4SUE 040 250 S06 | 4 | 25 | 0.04 | 70 | 6 | Select |
| 4SUE 040 300 S06 | 4 | 30 | 0.04 | 75 | 6 | Select |
