Description
4 Flutes Non Symmetry End Mills for SUS
- Endmills for alloy steel, SUS, Ti/Ni base alloy, Inconel and hard to cut materials.
- JCRO coating provides wear resistance improvement as well as avoid edge stress in various applications.
- Minimize chattering by unequal flute spacing design.
- Excellent work surface finish by 4 flute and deep chip pocket.
- Minimize fracturing at high feed by high TRS fine WC grade.
Download technical specification .pdf
| Part Number | Diameter | Length of cut | Chamfer | Overall Length | Shank Dia | Select Part |
| D | L1 | C | L | d | ||
| 4SUE 080 120 S08 | 8 | 12 | 0.08 | 70 | 8 | Select |
| 4SUE 080 200 S08 | 8 | 20 | 0.08 | 70 | 8 | Select |
| 4SUE 080 240 S08 | 8 | 24 | 0.08 | 70 | 8 | Select |
| 4SUE 080 300 S08 | 8 | 30 | 0.08 | 80 | 8 | Select |
| 4SUE 080 400 S08 | 8 | 40 | 0.08 | 90 | 8 | Select |
| 4SUE 080 500 S08 | 8 | 50 | 0.08 | 100 | 8 | Select |
