4CTE - 4 Flute Taper End Mills

(Showing 8 of 8)
  • Endmills for pre-hardened and hardened steel(HRc52~)
  • Good wear resistance by high quality Si-based PVD coating.
  • High precise edge tolerance.
  • Very nice work surface finish.
  • Minimize fracturing by high TRS fine(0.5μm) WC grade.
Compare
  • 4 Flute Taper End Mills

    JJ Tools

    3mm 4 Flute Taper End Mills

    Diameter (D): 3mm
    Angle: 0°30,1°,1°30,2°,2°30,3°,5°,7°,10°
    Length of Cut (L1): 11mm, 12mm, 15mm
    Overall Length (L): 50mm, 60mm
    Shank Dia (d): 6mm
    £29.68 - £52.56 inc. VAT
    £24.73 - £43.80 ex. VAT
    Dispatches in 5-7 days
  • 4 Flute Taper End Mills

    JJ Tools

    4mm 4 Flute Taper End Mills

    Diameter (D): 4mm
    Angle: 0°30, 1°, 1°30, 2°, 2°30, 3°, 5°, 7°
    Length of Cut (L1): 15mm, 18mm, 23mm, 25mm
    Overall Length (L): 60mm, 65mm, 75mm
    Shank Dia (d): 6mm, 8mm, 10mm
    £29.68 - £50.72 inc. VAT
    £24.73 - £42.27 ex. VAT
    Dispatches in 5-7 days
  • 4 Flute Taper End Mills

    JJ Tools

    5mm 4 Flute Taper End Mills

    Diameter (D): 5mm
    Angle: 0°30, 1°, 1°30, 2°, 2°30, 3°, 5°, 7°
    Length of Cut (L1): 15mm, 18mm, 20mm, 21mm, 28mm
    Overall Length (L): 60mm, 65mm, 80mm
    Shank Dia (d): 6mm, 8mm, 10mm, 12mm
    £31.44 - £70.72 inc. VAT
    £26.20 - £58.93 ex. VAT
    Dispatches in 5-7 days
  • 4 Flute Taper End Mills

    JJ Tools

    6mm 4 Flute Taper End Mills

    Diameter (D): 6mm
    Angle: 0°30, 1°, 1°30, 2°, 2°30, 3°, 5°, 7°,10°
    Length of Cut (L1): 20mm, 23mm, 24mm, 26mm,39mm
    Overall Length (L): 65mm, 75mm, 80mm,110mm
    Shank Dia (d): 8mm, 10mm, 12mm,20mm
    £43.52 - £190.40 inc. VAT
    £36.27 - £158.67 ex. VAT
    Dispatches in 5-7 days
  • 4 Flute Taper End Mills

    JJ Tools

    8mm 4 Flute Taper End Mills

    Diameter (D): 8mm
    Angle: 0°30, 1°, 1°30, 2°, 2°30, 3°, 5°
    Length of Cut (L1): 23mm, 25mm, 30mm
    Overall Length (L): 75mm, 80mm, 85mm
    Shank Dia (d): 10mm, 12mm
    £50.72 - £70.72 inc. VAT
    £42.27 - £58.93 ex. VAT
    Dispatches in 5-7 days
  • 4 Flute Taper End Mills

    JJ Tools

    10mm 4 Flute Taper End Mills

    Diameter (D): 10mm
    Angle: 0°30,1°,1°30,1°47,2°,3°,5°
    Length of Cut (L1): 28mm, 30mm,32mm,34mm, 40mm
    Overall Length (L): 80mm,85mm,100mm
    Shank Dia (d): 12mm, 16mm
    £70.72 - £122.40 inc. VAT
    £58.93 - £102.00 ex. VAT
    Dispatches in 5-7 days