Description
Single Point Engraving Tools
- Endmills for various work materials, hardened steel (HRc ~50), pre-hardened steel, tool steel and cast iron.
- Good wear resistance by Si-based PVD coating.
- Optimum for NC engraving by straight type one edge.
- Maximize engraving efficiency by various edge diameter.
Download technical specifications.pdf
Part Number | Diameter | Angle | Length of Cut | Overall Length | Shank Dia | Select Part |
D | L1 | L | d | |||
1STE 0005 200 S04 | 0.05 | 20° | 5 | 40 | 4 | Select |
1STE 0005 300 S04 | 0.05 | 30° | 5 | 40 | 4 | Select |
1STE 0005 900 S04 | 0.05 | 90° | 1.97 | 40 | 4 | Select |
1STE 0005 200 S06 | 0.05 | 20° | 5 | 50 | 6 | Select |
1STE 0005 300 S06 | 0.05 | 30° | 5 | 50 | 6 | Select |
1STE 0005 900 S06 | 0.05 | 90° | 2.97 | 50 | 6 | Select |
1STE 0005 1200 S06 | 0.05 | 120° | 1.71 | 50 | 6 | Select |