Description
Single Point Engraving Tools
- Endmills for various work materials, hardened steel (HRc ~50), pre-hardened steel, tool steel and cast iron.
- Good wear resistance by Si-based PVD coating.
- Optimum for NC engraving by straight type one edge.
- Maximize engraving efficiency by various edge diameter.
Download technical specifications.pdf
| Part Number | Diameter | Angle | Length of Cut | Overall Length | Shank Dia | Select Part |
| D | L1 | L | d | |||
| 1STE 0015 200 S04 | 0.15 | 20° | 5 | 40 | 4 | Select |
| 1STE 0015 300 S04 | 0.15 | 30° | 5 | 40 | 4 | Select |
| 1STE 0015 600 S04 | 0.15 | 60° | 3.33 | 40 | 4 | Select |
| 1STE 0015 900 S04 | 0.15 | 90° | 1.92 | 40 | 4 | Select |
| 1STE 0015 200 S06 | 0.15 | 20° | 5 | 50 | 6 | Select |
| 1STE 0015 300 S06 | 0.15 | 30° | 5 | 50 | 6 | Select |
| 1STE 0015 900 S06 | 0.15 | 90° | 2.92 | 50 | 6 | Select |
| 1STE 0015 1200 S06 | 0.15 | 120° | 1.68 | 50 | 6 | Select |
