Description
2 Flute Rib End Mills for Steel
Endmills for pre-hardened and hardened steel(HRc50~60)
Good wear resistance by Si-based PVD coating.
High precise edge tolerance.
Reinforced edge design for preventing edge chipping.
Outstanding performance at high speed machining by ultra fine (0.2µm) WC grade.
Download Technical Specification .pdf
| Part Number | Diameter | Length of Cut | Effective Length | Overall Length | Shank Dia | Select Part |
| D | L1 | L2 | L | d | ||
| 2HRE 006 010 S04 | 0.6 | 0.6 | 1 | 40 | 4 | Select |
| 2HRE 006 020 S04 | 0.6 | 0.6 | 2 | 40 | 4 | Select |
| 2HRE 006 030 S04 | 0.6 | 0.6 | 3 | 40 | 4 | Select |
| 2HRE 006 040 S04 | 0.6 | 0.6 | 4 | 40 | 4 | Select |
| 2HRE 006 050 S04 | 0.6 | 0.6 | 5 | 40 | 4 | Select |
| 2HRE 006 060 S04 | 0.6 | 0.6 | 6 | 40 | 4 | Select |
| 2HRE 006 080 S04 | 0.6 | 0.6 | 8 | 40 | 4 | Select |
| 2HRE 006 100 S04 | 0.6 | 0.6 | 10 | 40 | 4 | Select |
| 2HRE 006 120 S04 | 0.6 | 0.6 | 12 | 45 | 4 | Select |
| 2HRE 006 140 S04 | 0.6 | 0.6 | 14 | 45 | 4 | Select |
| 2HRE 006 160 S04 | 0.6 | 0.6 | 16 | 45 | 4 | Select |
