2 Flute Corner Radius Rib End Mills for Steel
- Endmills for pre-hardened and hardened steel(HRc50~62)
- Good wear resistance by Si-based PVD coating.
- High precise edge tolerance.
- Designed for minimizing edge chipping by corner R shape.
- Various corner R and flute length for wide range application.
- Outstanding performance at high speed machining by ultra fine (0.2μm) WC grade.
|PartNumber||Diameter||Length of Cut||Effective Length||Overall Length||Shank Dia|
|D x R||L1||L2||L||d|
|2CRE007001020||0.7 x R0.1||0.7||2||45||4|
|2CRE007001040||0.7 x R0.1||0.7||4||45||4|
|2CRE007001060||0.7 x R0.1||0.7||6||45||4|
|2CRE007001080||0.7 x R0.1||0.7||8||45||4|
|2CRE007001100||0.7 x R0.1||0.7||10||45||4|
Diameter (D x R):
0.7mm x R0.1
Length of Cut (L1):
Effective Length (L2):
2, 4, 6mm
Overall Length (L):
Shank Diameter (d):