Description
2 Flute Square End Taper End Mills
- Endmills for pre-hardened and hardened steel(HRc52~)
- Excellent wear resistance by Si-based PVD coating.
- High precise edge tolerance.
- Excellent work surface finish.
- Minimize fracturing by high TRS fine(0.5μm) WC grade.
Download technical specification .pdf
| Part Number | Diameter | Angle | Length of Cut | Overall Length | Shank Dia | Select Part |
| D | L1 | L | d | |||
| 2CTE 008 003 030 | 0.8 | 0°30 | 3 | 40 | 4 | Select |
| 2CTE 008 010 030 | 0.8 | 1° | 3 | 40 | 4 | Select |
| 2CTE 008 013 030 | 0.8 | 1°30 | 3 | 40 | 4 | Select |
| 2CTE 008 020 030 | 0.8 | 2° | 3 | 40 | 4 | Select |
| 2CTE 008 030 030 | 0.8 | 3° | 3 | 40 | 4 | Select |
| 2CTE 008 050 030 | 0.8 | 5° | 3 | 40 | 4 | Select |
| 2CTE 008 070 030 | 0.8 | 7° | 3 | 40 | 4 | Select |
| 2CTE 008 100 030 | 0.8 | 10° | 3 | 40 | 4 | Select |
| 2CTE 008 150 030 | 0.8 | 15° | 3 | 40 | 4 | Select |
| 2CTE 008 200 030 | 0.8 | 20° | 3 | 40 | 4 | Select |
