Description
2 Flutes Taper Neck Ball End Mills for Graphite
- Endmill for various work materials, graphite, hardened steel(HRc~48), pre-hardened steel, tool steel and cast iron.
- Excellent performance with low cutting force by ALTIN coating.
- Long flute length optimized for deep-side wall machining of graphite.
- Applied fine WC grade optimized for various non-ferrous and non-metallic work materials.
Download technical specification.pdf
| Part Number | Diameter | Angle | Length of Cut | Effective Length | Overall Length | Shank Dia | Select Part |
| R x D | L1 | L2 | L | d | |||
| 2TGB 015 003 300 | 0.75R x 1.5 | 0°30 | 6 | 30 | 75 | 4 | Select |
| 2TGB 015 003 400 | 0.75R x 1.5 | 0°30 | 6 | 40 | 80 | 4 | Select |
| 2TGB 015 003 500 | 0.75R x 1.5 | 0°30 | 6 | 50 | 100 | 4 | Select |
| 2TGB 015 010 300 | 0.75R x 1.5 | 1° | 6 | 30 | 75 | 4 | Select |
| 2TGB 015 010 500 | 0.75R x 1.5 | 1° | 6 | 50 | 100 | 4 | Select |
| 2TGB 015 010 600 | 0.75R x 1.5 | 1° | 6 | 60 | 100 | 4 | Select |
