2 Flute Corner Radius Rib End Mills for Steel
- Endmills for pre-hardened and hardened steel(HRc50~62)
- Good wear resistance by Si-based PVD coating.
- High precise edge tolerance.
- Designed for minimizing edge chipping by corner R shape.
- Various corner R and flute length for wide range application.
- Outstanding performance at high speed machining by ultra fine (0.2μm) WC grade.
|PartNumber||Diameter||Length of Cut||Effective Length||Overall Length||Shank Dia|
|D x R||L1||L2||L||d|
|2CRE025001100||2.5 x R0.1||2.5||10||50||4|
|2CRE025001160||2.5 x R0.1||2.5||16||50||4|
|2CRE025001200||2.5 x R0.1||2.5||20||50||4|
|2CRE025001250||2.5 x R0.1||2.5||25||60||4|
|2CRE025001300||2.5 x R0.1||2.5||30||70||4|
Diameter (D x R):
2.5mm x R0.1
Length of Cut (L1):
Effective Length (L2):
10, 16, 20, 25, 30mm
Overall Length (L):
50, 60, 70mm
Shank Diameter (d):