4 Flutes Rib Corner Radius End Mills for SUS
- Endmills for alloy steel, SUS, Ti/Ni base alloy, Inconel and hard to cut materials.
- JCRO coating provides wear resistance improvement as well as avoid edge stress in various applications.
- Minimize chattering by unequal flute spacing design.
- Excellent work surface finish by 4 flute and deep chip pocket.
- Minimize fracturing at high feed by high TRS fine WC grade.
|PartNumber||Diameter||Length of Cut||Effective Length||Overall Length||Shank Dia|
|D x R||L1||L2||L||d|
|4SUCR020002100||2 x R0.2||3||10||60||4|
|4SUCR020002120||2 x R0.2||3||12||60||4|
|4SUCR020002160||2 x R0.2||3||16||60||4|
Diameter (R x D):
2mm x R0.2
Length of Cut (L1):
Effective Length (L2):
Overall Length (L1):
Shank Dia (d):