3.0mm - 3.9mm Carbide Drills Without Coolant - DC150 5xD

£35.78 inc. VAT
£29.82 ex. VAT


Solid Carbide Twist Drills - Walter Titex DC150 Perform Range

Part Number Description Diameter (Dc) " Length (Lc) Length (l2) Overall Length (l1) Shank Dia (d1)
WAL7462060 DC150-05-03.000A0-WJ30TA 3mm   23mm 28mm 66mm 6mm
WAL7462061 DC150-05-03.100A0-WJ30TA 3.1mm   23mm 28mm 66mm 6mm
WAL7462062 DC150-05-03.175A0-WJ30TA 3.175mm 1/8" 23mm 28mm 66mm 6mm
WAL7462063 DC150-05-03.200A0-WJ30TA 3.2mm   23mm 28mm 66mm 6mm
WAL7462064 DC150-05-03.250A0-WJ30TA 3.25mm   23mm 28mm 66mm 6mm
WAL7462065 DC150-05-03.300A0-WJ30TA 3.3mm   23mm 28mm 66mm 6mm
WAL7462066 DC150-05-03.400A0-WJ30TA 3.4mm   23mm 28mm 66mm 6mm
WAL7462067 DC150-05-03.500A0-WJ30TA 3.5mm   23mm 28mm 66mm 6mm
WAL7462068 DC150-05-03.600A0-WJ30TA 3.6mm   23mm 28mm 66mm 6mm
WAL7462069 DC150-05-03.650A0-WJ30TA 3.65mm   23mm 28mm 66mm 6mm
WAL7462070 DC150-05-03.700A0-WJ30TA 3.7mm   23mm 28mm 66mm 6mm
WAL7462071 DC150-05-03.800A0-WJ30TA 3.8mm   29mm 36mm 74mm 6mm
WAL7462072 DC150-05-03.900A0-WJ30TA 3.9mm   29mm 36mm 74mm 6mm
WAL7462073 DC150-05-03.969A0-WJ30TA 3.969mm 5/32" 29mm 36mm 74mm 6mm


  • ISO material groups P, M, K, N, S, H, O
  • Can be used with emulsion, oil
  • Areas of use: General mechanical engineering, mould and die making, energy and automotive industries
  • Solid carbide twist drill
  • Grades: WJ30RE and WJ30TA
  • 140° point angle
  • Dia. 1.5–20 mm 

Extra Information

Walter Titex
Diameter (Dc):
3.0mm - 3.9mm
Shank Diameter (d1):
Without Through Coolant