Description
3 Flutes High Speed Roughing End Mills for Aluminum Coated
- End mills for Aluminum, AL alloys, non-ferrous and non-metallic materials
- Minimize built up edge by chip breaker and deep pocket design.
- Tetrabond TAC coating provides high hardness and low friction on the coating
layer - Good surface integrity differently from competitor’s AL roughing End Mills.
- Minimize fracturing by high TRS fine(0.5㎛) WC grade.
Download technical specification.pdf
| Part Number | Diameter DxR |
Length of cut L1 |
Overall Length L |
Shank Dia d |
Select Part |
| 3ALCBC 030 080 S06 | 3 X R0.2 | 8 | 55 | 6 | Select |
| 3ALCBC 030 110 S06 | 3 X R0.2 | 11 | 55 | 6 | Select |
| 3ALCBC 040 100 S06 | 4 X R0.2 | 10 | 55 | 6 | Select |
| 3ALCBC 040 130 S06 | 4 X R0.2 | 13 | 55 | 6 | Select |
| 3ALCBC 050 120 S06 | 5 X R0.2 | 12 | 55 | 6 | Select |
| 3ALCBC 050 170 S06 | 5 X R0.2 | 17 | 55 | 6 | Select |
| 3ALCBC 060 170 S06 | 6 X R0.2 | 17 | 60 | 6 | Select |
| 3ALCBC 060 250 S06 | 6 X R0.2 | 25 | 80 | 6 | Select |
| 3ALCBC 080 220 S08 | 8 X R0.2 | 22 | 70 | 8 | Select |
| 3ALCBC 080 300 S08 | 8 X R0.2 | 30 | 90 | 8 | Select |
| 3ALCBC 100 270 S10 | 10 X R0.2 | 27 | 75 | 10 | Select |
| 3ALCBC 100 400 S10 | 10 X R0.2 | 40 | 100 | 10 | Select |
| 3ALCBC 120 350 S12 | 12 X R0.2 | 35 | 80 | 12 | Select |
| 3ALCBC 120 500 S12 | 12 X R0.2 | 50 | 110 | 12 | Select |
| 3ALCBC 160 420 S16 | 16 X R0.2 | 42 | 100 | 16 | Select |
| 3ALCBC 160 520 S16 | 16 X R0.2 | 52 | 150 | 16 | Select |
| 3ALCBC 200 480 S20 | 20 X R0.2 | 48 | 100 | 20 | Select |
| 3ALCBC 200 550 S20 | 20 X R0.2 | 55 | 160 | 20 | Select |
