4 Flutes Non Symmetry Corner Radius End Mills for SUS
- Endmills for alloy steel, SUS, Ti/Ni base alloy, Inconel and hard to cut materials.
- JCRO coating provides wear resistance improvement as well as avoid edge stress in various applications.
- Strong design for protection against chattering.
- Preventing bottom edge chipping by corner R.
- Minimize fracturing at high feed by high TRS fine WC grade.
|Part Number||Diameter||Length of Cut||Overall Length||Shank Dia|
|D x R||L1||L||d|
|4SUC 030 002 055||3 x R0.2||6||55||6|
|4SUC 030 002 S06||3 x R0.2||10||60||6|
Diameter (R x D):
3mm x R0.2
Length of Cut (L1):
Overall Length (L1):
Shank Dia (d):