Description
2 Flutes Rib Corner Radius End Mills for Copper
- Endmills for copper, copper alloy, nonferrous and nonmetallic materials.
- JCRO coating provides wear resistance improvement as well as avoid edge stress in various applications.
- Smooth chip outflow by deep chip pocket.
- Minimize fracturing by high TRS fine(0.5μm) WC grade.
Download technical specification.pdf
| Part Number | Diameter | Length of Cut | Effective Length | Overall Length | Shank Dia | Select Part |
| D x R | L1 | L2 | L | d | ||
| 2COR 040 001 120 | 4 x R0.1 | 5 | 12 | 55 | 6 | Select |
| 2COR 040 001 160 | 4 x R0.1 | 5 | 16 | 55 | 6 | Select |
| 2COR 040 001 200 | 4 x R0.1 | 5 | 20 | 60 | 6 | Select |
| 2COR 040 001 300 | 4 x R0.1 | 5 | 30 | 70 | 6 | Select |
| 2COR 040 001 400 | 4 x R0.1 | 5 | 40 | 80 | 6 | Select |
| 2COR 040 002 120 | 4 x R0.2 | 5 | 12 | 55 | 6 | Select |
| 2COR 040 002 160 | 4 x R0.2 | 5 | 16 | 55 | 6 | Select |
| 2COR 040 002 200 | 4 x R0.2 | 5 | 20 | 60 | 6 | Select |
| 2COR 040 002 300 | 4 x R0.2 | 5 | 30 | 70 | 6 | Select |
| 2COR 040 002 400 | 4 x R0.2 | 5 | 40 | 80 | 6 | Select |
| 2COR 040 003 120 | 4 x R0.3 | 5 | 12 | 55 | 6 | Select |
| 2COR 040 003 160 | 4 x R0.3 | 5 | 16 | 55 | 6 | Select |
| 2COR 040 003 200 | 4 x R0.3 | 5 | 20 | 60 | 6 | Select |
| 2COR 040 003 300 | 4 x R0.3 | 5 | 30 | 70 | 6 | Select |
| 2COR 040 003 400 | 4 x R0.3 | 5 | 40 | 80 | 6 | Select |
| 2COR 040 005 120 | 4 x R0.5 | 5 | 12 | 55 | 6 | Select |
| 2COR 040 005 160 | 4 x R0.5 | 5 | 16 | 55 | 6 | Select |
| 2COR 040 005 200 | 4 x R0.5 | 5 | 20 | 60 | 6 | Select |
| 2COR 040 005 300 | 4 x R0.5 | 5 | 30 | 70 | 6 | Select |
| 2COR 040 005 400 | 4 x R0.5 | 5 | 40 | 80 | 6 | Select |
| 2COR 040 010 120 | 4 x R1 | 5 | 12 | 55 | 6 | Select |
| 2COR 040 010 160 | 4 x R1 | 5 | 16 | 55 | 6 | Select |
| 2COR 040 010 200 | 4 x R1 | 5 | 20 | 60 | 6 | Select |
| 2COR 040 010 300 | 4 x R1 | 5 | 30 | 70 | 6 | Select |
| 2COR 040 010 400 | 4 x R1 | 5 | 40 | 80 | 6 | Select |
