Description
3 Flutes 45 Helix Rib Corner Radius End Mills for Copper
- Endmills for copper, copper alloy, nonferrous and nonmetallic materials.
- JCRO coating provides wear resistance improvement as well as avoid edge stress in various applications.
- High speed, feed applicable by 3 flute 45 degree helix and deep chip pocket design.
- Minimize fracturing by high TRS fine(0.5μm) WC grade.
Download technical specifications.pdf
| Part Number | Diameter | Length of Cut | Effective Length | Overall Length | Shank Dia | Select Part |
| D x R | L1 | L2 | L | d | ||
| 3COR 060 003 200 | 6 x R0.3 | 9 | 20 | 55 | 6 | Select |
| 3COR 060 003 300 | 6 x R0.3 | 9 | 30 | 70 | 6 | Select |
| 3COR 060 005 200 | 6 x R0.5 | 9 | 20 | 55 | 6 | Select |
| 3COR 060 005 300 | 6 x R0.5 | 9 | 30 | 70 | 6 | Select |
| 3COR 060 010 200 | 6 x R1 | 9 | 20 | 55 | 6 | Select |
| 3COR 060 010 300 | 6 x R1 | 9 | 30 | 70 | 6 | Select |
