2 Flute Corner Radius Rib End Mills for Steel
- Endmills for pre-hardened and hardened steel(HRc50~62)
- Good wear resistance by Si-based PVD coating.
- High precise edge tolerance.
- Designed for minimizing edge chipping by corner R shape.
- Various corner R and flute length for wide range application.
- Outstanding performance at high speed machining by ultra fine (0.2μm) WC grade.
|PartNumber||Diameter||Length of Cut||Effective Length||Overall Length||Shank Dia|
|D x R||L1||L2||L||d|
|2CRE060015200||6 x R1.5||7||20||60||6|
|2CRE060015400||6 x R1.5||7||40||90||6|
Diameter (D x R):
6 x R1.5mm
Length of Cut (L1):
Effective Length (L2):
Overall Length (L):
Shank Diameter (d):