3 Flutes 45 Helix Rib Corner Radius End Mills for Copper
- Endmills for copper, copper alloy, nonferrous and nonmetallic materials.
- JCRO coating provides wear resistance improvement as well as avoid edge stress in various applications.
- High speed, feed applicable by 3 flute 45 degree helix and deep chip pocket design.
- Minimize fracturing by high TRS fine(0.5μm) WC grade.
|Part Number||Diameter||Length of Cut||Effective Length||Overall Length||Shank Dia|
|D x R||L1||L2||L||d|
|3COR080003S08||8.0 x R0.3||12||25||65||8|
|3COR080005S08||8.0 x R0.5||12||25||65||8|
|3COR080010S08||8.0 x R1||12||25||65||8|
Diameter (D x R):
8mm x R0.3,8mm x R0.5,8mm x R1
Length of Cut (L1):
Effective Length (L2):
Overall Length (L):