2CCMC - Corner Chamfer Cutters

(Showing 10 of 10)
  • Pre-hardened steel, Cast iron, Non-metallic materials Multi function endmill for corner chamfering, side wall.
  • Minimize edge chipping by applying edge chamfering design.
  • JCRO coating provides wear resistance improvement as well as avoid edge stress in various applications.
  • Endmills for various work materials.
Compare
  • 2 Flute Corner Chamfering End Mills - JJ Tools

    JJ Tools

    12mm Corner Chamfering End Mills

    Diameter (D): 12mm
    Chamfer (C): 0.1mm, 0.2mm, 0.5mm, 1mm, 1.5mm, 2mm, 3mm, 4mm, 5mm
    Length of Cut (L1): 26mm
    Overall Length (L): 80mm
    Shank Dia (d): 12mm
    £39.20 - £41.60 inc. VAT
    £32.67 - £34.67 ex. VAT
    Dispatches in 5-7 days
  • 2 Flute Corner Chamfering End Mills - JJ Tools

    JJ Tools

    10mm Corner Chamfering End Mills

    Diameter (D): 10mm
    Chamfer (C): 0.1mm, 0.2mm, 0.5mm, 1mm, 1.5mm, 2mm, 3mm, 4mm
    Length of Cut (L1): 22mm
    Overall Length (L): 75mm
    Shank Dia (d): 10mm
    £32.88 - £34.64 inc. VAT
    £27.40 - £28.87 ex. VAT
    Dispatches in 5-7 days
  • 2 Flute Corner Chamfering End Mills - JJ Tools

    JJ Tools

    8mm Corner Chamfering End Mills

    Diameter (D): 8mm
    Chamfer (C): 0.1mm, 0.2mm, 0.5mm, 1mm, 1.5mm, 2mm, 2.5mm, 3mm
    Length of Cut (L1): 19mm
    Overall Length (L): 70mm
    Shank Dia (d): 8mm
    £23.04 - £24.56 inc. VAT
    £19.20 - £20.47 ex. VAT
    Dispatches in 5-7 days
  • 2 Flute Corner Chamfering End Mills - JJ Tools

    JJ Tools

    6mm Corner Chamfering End Mills

    Diameter (D): 6mm
    Chamfer (C): 0.05mm, 0.1mm, 0.2mm, 0.3mm, 0.5mm, 1mm, 1.5mm, 2mm, 2.5mm
    Length of Cut (L1): 13mm
    Overall Length (L): 60mm
    Shank Dia (d): 6mm
    £16.24 - £17.52 inc. VAT
    £13.53 - £14.60 ex. VAT
    Dispatches in 5-7 days
  • 2 Flute Corner Chamfering End Mills - JJ Tools

    JJ Tools

    5mm Corner Chamfering End Mills

    Diameter (D): 5mm
    Chamfer (C): 0.1mm, 0.2mm, 0.5mm, 1mm, 1.5mm, 2mm
    Length of Cut (L1): 13mm
    Overall Length (L): 60mm
    Shank Dia (d): 6mm
    £16.24 - £17.52 inc. VAT
    £13.53 - £14.60 ex. VAT
    Dispatches in 5-7 days
  • 2 Flute Corner Chamfering End Mills - JJ Tools

    JJ Tools

    4mm Corner Chamfering End Mills

    Diameter (D): 4mm
    Chamfer (C): 0.05mm, 0.1mm, 0.2mm, 0.3mm, 0.5mm, 1mm, 1.5mm
    Length of Cut (L1): 11mm
    Overall Length (L): 50mm
    Shank Dia (d): 6mm
    £14.08 inc. VAT
    £11.73 ex. VAT
    Dispatches in 5-7 days