Description
ECOCUT HFN 10 LE Neat Cutting Oil
Low misting, low evaporating oil specially suitable for grinding of ferrous and non-ferrous materials.
Series includes higher viscosities for hydraulic systems and for normal to difficult machining operations
Description
ECOCUT HFN 10 LE is a multi-purpose oil for cutting, grinding and honing operations. It is designed to rationalize lubricant inventories and can also be used for hydraulic systems and spindle oil applications.
ECOCUT HFN 10 LE is recommended for normal to difficult machining operations on cast iron, steel and non-ferrous metals. The optimized heat transfer properties permit higher feed and cutting speeds.
The LE designation signifies “low evaporation” and stands for excellent anti-mist properties and low evaporation during use. These oils contribute towards reducing environmental and workshop pollution.
How to Use
ECOCUT HFN 10 LE is used as received for all machining operations. Your local FUCHS representative can provide you with specific recommendations for your operation.
The product should be stored in its original sealed container at temperatures between 45ºF and 90ºF.
Download
Material
- Steel
- Cast Iron
- Aluminium
- Nonferrous metals
- Copper, copper alloys
- Magnesium
- High Speed Steel (HSS)
Processing
- Turning
- Milling
- Drilling
- Grinding
- Deep hole drilling
- Lapping/Finishing
- Honing
- Gear milling
- Ball bearing processing
| Type |
Mineral oil based |
| Density at 15 °C |
0.84 g/ml |
| Flash point |
170 °C |
| Kin. viscosity at 40 °C |
10 mm²/s |
