Description
4 Flute Rib Taper End Mills
- Endmills for pre-hardened and hardened steel(HRc50~)
- Good wear resistance with Si-based PVD coating.
- Optimum for deep grooving.
- High precise edge tolerance.
- Excellent work surface finish.
- Minimize fracturing with high TRS fine(0.5μm) WC grade.
Download technical specification .pdf
| Part Number | Diameter | Angle | Length of Cut | Overall Length | Shank Dia | Select Part |
| D | L1 | L | d | |||
| 4RTE 008 030 060 | 0.8 | 0°30 | 6 | 45 | 4 | Select |
| 4RTE 008 030 080 | 0.8 | 0°30 | 8 | 45 | 4 | Select |
| 4RTE 008 030 100 | 0.8 | 0°30 | 10 | 45 | 4 | Select |
| 4RTE 008 045 060 | 0.8 | 0°45 | 6 | 45 | 4 | Select |
| 4RTE 008 045 080 | 0.8 | 0°45 | 8 | 45 | 4 | Select |
| 4RTE 008 045 100 | 0.8 | 0°45 | 10 | 45 | 4 | Select |
| 4RTE 008 100 060 | 0.8 | 1° | 6 | 45 | 4 | Select |
| 4RTE 008 100 080 | 0.8 | 1° | 8 | 45 | 4 | Select |
| 4RTE 008 100 100 | 0.8 | 1° | 10 | 45 | 4 | Select |
