Description
4 Flute Rib Taper End Mills
- Endmills for pre-hardened and hardened steel(HRc50~)
- Good wear resistance with Si-based PVD coating.
- Optimum for deep grooving.
- High precise edge tolerance.
- Excellent work surface finish.
- Minimize fracturing with high TRS fine(0.5μm) WC grade.
Download technical specification .pdf
| Part Number | Diameter | Angle | Length of Cut | Overall Length | Shank Dia | Select Part |
| D | L1 | L | d | |||
| 4RTE 025 030 100 | 2.5 | 0°30 | 10 | 45 | 4 | Select |
| 4RTE 025 030 160 | 2.5 | 0°30 | 16 | 50 | 4 | Select |
| 4RTE 025 030 200 | 2.5 | 0°30 | 20 | 60 | 4 | Select |
| 4RTE 025 030 250 | 2.5 | 0°30 | 25 | 60 | 4 | Select |
| 4RTE 025 100 100 | 2.5 | 1° | 10 | 45 | 4 | Select |
| 4RTE 025 100 160 | 2.5 | 1° | 16 | 50 | 4 | Select |
| 4RTE 025 100 200 | 2.5 | 1° | 20 | 60 | 4 | Select |
| 4RTE 025 100 250 | 2.5 | 1° | 25 | 60 | 4 | Select |
| 4RTE 025 130 100 | 2.5 | 1°30 | 10 | 45 | 4 | Select |
| 4RTE 025 130 160 | 2.5 | 1°30 | 16 | 50 | 4 | Select |
| 4RTE 025 130 200 | 2.5 | 1°30 | 20 | 60 | 4 | Select |
| 4RTE 025 130 250 | 2.5 | 1°30 | 25 | 60 | 4 | Select |
