1.5mm 2 Flute Rib Corner Radius End Mills for Copper

JJ Tools

No reviews yet Write a Review
Part Number:
2COR 015 001 060
£18.47 inc. VAT
£15.39 ex. VAT
Shipping:
Calculated at Checkout
£18.47 inc. VAT
£15.39 ex. VAT

Description

2 Flutes Rib Corner Radius End Mills for Copper

  • Endmills for copper, copper alloy, nonferrous and nonmetallic materials.
  • JCRO coating provides wear resistance improvement as well as avoid edge stress in various applications.
  • Smooth chip outflow by deep chip pocket.
  • Minimize fracturing by high TRS fine(0.5μm) WC grade.

Download technical specification.pdf

Part Number Diameter Length of Cut Effective Length Overall Length Shank Dia Select Part
D x R L1 L2 L d
2COR 015 001 060 1.5 x R0.1 2 6 50 4 Select
2COR 015 001 100 1.5 x R0.1 2 10 50 4 Select
2COR 015 001 120 1.5 x R0.1 2 12 50 4 Select
2COR 015 001 160 1.5 x R0.1 2 16 50 4 Select
2COR 015 001 200 1.5 x R0.1 2 20 50 4 Select
2COR 015 001 250 1.5 x R0.1 2 25 60 4 Select
2COR 015 002 060 1.5 x R0.2 2 6 50 4 Select
2COR 015 002 100 1.5 x R0.2 2 10 50 4 Select
2COR 015 002 120 1.5 x R0.2 2 12 50 4 Select
2COR 015 002 160 1.5 x R0.2 2 16 50 4 Select
2COR 015 002 200 1.5 x R0.2 2 20 50 4 Select
2COR 015 002 250 1.5 x R0.2 2 25 60 4 Select
2COR 015 003 060 1.5 x R0.3 2 6 50 4 Select
2COR 015 003 100 1.5 x R0.3 2 10 50 4 Select
2COR 015 003 120 1.5 x R0.3 2 12 50 4 Select
2COR 015 003 160 1.5 x R0.3 2 16 50 4 Select
2COR 015 003 200 1.5 x R0.3 2 20 50 4 Select
2COR 015 003 250 1.5 x R0.3 2 25 60 4 Select
2COR 015 005 060 1.5 x R0.5 2 6 50 4 Select
2COR 015 005 100 1.5 x R0.5 2 10 50 4 Select
2COR 015 005 120 1.5 x R0.5 2 12 50 4 Select
2COR 015 005 160 1.5 x R0.5 2 16 50 4 Select
2COR 015 005 200 1.5 x R0.5 2 20 50 4 Select
2COR 015 005 250 1.5 x R0.5 2 25 60 4 Select

 

Extra Information

Brand:
JJ Tools
Diameter (D x R):
1.5mm x R.01,1 .5mm x R.02,1 .5mm x R0.3,1.5mm x R0.5
Length of Cut (L1):
2mm
Effective Length (L2):
6, 8, 10, 12, 16, 20, 25mm
Overall Length (L):
50, 60mm
Shank Dia (d):
4mm