Description
2 Flutes Rib Corner Radius End Mills for Copper
- Endmills for copper, copper alloy, nonferrous and nonmetallic materials.
- JCRO coating provides wear resistance improvement as well as avoid edge stress in various applications.
- Smooth chip outflow by deep chip pocket.
- Minimize fracturing by high TRS fine(0.5μm) WC grade.
Download technical specification.pdf
| Part Number | Diameter | Length of Cut | Effective Length | Overall Length | Shank Dia | Select Part |
| D x R | L1 | L2 | L | d | ||
| 2COR 025 001 060 | 2.5 x R0.1 | 3.5 | 6 | 50 | 4 | Select |
| 2COR 025 001 100 | 2.5 x R0.1 | 3.5 | 10 | 50 | 4 | Select |
| 2COR 025 001 120 | 2.5 x R0.1 | 3.5 | 12 | 50 | 4 | Select |
| 2COR 025 001 160 | 2.5 x R0.1 | 3.5 | 16 | 50 | 4 | Select |
| 2COR 025 001 200 | 2.5 x R0.1 | 3.5 | 20 | 50 | 4 | Select |
| 2COR 025 001 250 | 2.5 x R0.1 | 3.5 | 25 | 60 | 4 | Select |
| 2COR 025 002 060 | 2.5 x R0.2 | 3.5 | 6 | 50 | 4 | Select |
| 2COR 025 002 100 | 2.5 x R0.2 | 3.5 | 10 | 50 | 4 | Select |
| 2COR 025 002 120 | 2.5 x R0.2 | 3.5 | 12 | 50 | 4 | Select |
| 2COR 025 002 160 | 2.5 x R0.2 | 3.5 | 16 | 50 | 4 | Select |
| 2COR 025 002 200 | 2.5 x R0.2 | 3.5 | 20 | 50 | 4 | Select |
| 2COR 025 002 250 | 2.5 x R0.2 | 3.5 | 25 | 60 | 4 | Select |
| 2COR 025 003 060 | 2.5 x R0.3 | 3.5 | 6 | 50 | 4 | Select |
| 2COR 025 003 100 | 2.5 x R0.3 | 3.5 | 10 | 50 | 4 | Select |
| 2COR 025 003 120 | 2.5 x R0.3 | 3.5 | 12 | 50 | 4 | Select |
| 2COR 025 003 160 | 2.5 x R0.3 | 3.5 | 16 | 50 | 4 | Select |
| 2COR 025 003 200 | 2.5 x R0.3 | 3.5 | 20 | 50 | 4 | Select |
| 2COR 025 003 250 | 2.5 x R0.3 | 3.5 | 25 | 60 | 4 | Select |
| 2COR 025 005 060 | 2.5 x R0.5 | 3.5 | 6 | 50 | 4 | Select |
| 2COR 025 005 100 | 2.5 x R0.5 | 3.5 | 10 | 50 | 4 | Select |
| 2COR 025 005 120 | 2.5 x R0.5 | 3.5 | 12 | 50 | 4 | Select |
| 2COR 025 005 160 | 2.5 x R0.5 | 3.5 | 16 | 50 | 4 | Select |
| 2COR 025 005 200 | 2.5 x R0.5 | 3.5 | 20 | 50 | 4 | Select |
| 2COR 025 005 250 | 2.5 x R0.5 | 3.5 | 25 | 60 | 4 | Select |
