4 Flute Corner Radius Rib End Mills for Steel
- Endmills for pre-hardened and hardened steel(HRc50~62) Good wear resistance by Si-based PVD coating.
- High precise edge tolerance.
- Designed for minimizing edge chipping by corner R shape.
- Various corner R and flute length for wide range application.
- Outstanding performance at high speed machining by ultra fine (0.2μm) WC grade.
|PartNumber||Diameter||Length of Cut||Effective Length||Overall Length||Shank Dia|
|D x R||L1||L2||L||d|
|4CRE0150005060||1.5 x R0.05||1.5||6||45||4|
|4CRE0150005080||1.5 x R0.05||1.5||8||45||4|
|4CRE0150005100||1.5 x R0.05||1.5||10||50||4|
|4CRE0150005120||1.5 x R0.05||1.5||12||50||4|
|4CRE0150005140||1.5 x R0.05||1.5||14||50||4|
|4CRE0150005160||1.5 x R0.05||1.5||16||50||4|
|4CRE0150005200||1.5 x R0.05||1.5||20||50||4|
|4CRE0150005220||1.5 x R0.05||1.5||22||60||4|
|4CRE0150005250||1.5 x R0.05||1.5||25||60||4|
Diameter (D x R):
1.5mm x R0.05
Length of Cut (L1):
Effective Length (L2):
6, 8, 10, 12, 14, 16, 20, 22, 25mm
Shank Diameter (d):