Description
2 Flutes Rib Corner Radius End Mills for Copper
- Endmills for copper, copper alloy, nonferrous and nonmetallic materials.
- JCRO coating provides wear resistance improvement as well as avoid edge stress in various applications.
- Smooth chip outflow by deep chip pocket.
- Minimize fracturing by high TRS fine(0.5μm) WC grade.
Download technical specification.pdf
| Part Number | Diameter | Length of Cut | Effective Length | Overall Length | Shank Dia | Select Part |
| D x R | L1 | L2 | L | d | ||
| 2COR 010 001 040 | 1 x R0.1 | 1.5 | 4 | 50 | 4 | Select |
| 2COR 010 001 060 | 1 x R0.1 | 1.5 | 6 | 50 | 4 | Select |
| 2COR 010 001 080 | 1 x R0.1 | 1.5 | 8 | 50 | 4 | Select |
| 2COR 010 001 100 | 1 x R0.1 | 1.5 | 10 | 50 | 4 | Select |
| 2COR 010 001 120 | 1 x R0.1 | 1.5 | 12 | 50 | 4 | Select |
| 2COR 010 001 160 | 1 x R0.1 | 1.5 | 16 | 50 | 4 | Select |
| 2COR 010 001 200 | 1 x R0.1 | 1.5 | 20 | 50 | 4 | Select |
| 2COR 010 002 040 | 1 x R0.2 | 1.5 | 4 | 50 | 4 | Select |
| 2COR 010 002 060 | 1 x R0.2 | 1.5 | 6 | 50 | 4 | Select |
| 2COR 010 002 080 | 1 x R0.2 | 1.5 | 8 | 50 | 4 | Select |
| 2COR 010 002 100 | 1 x R0.2 | 1.5 | 10 | 50 | 4 | Select |
| 2COR 010 002 120 | 1 x R0.2 | 1.5 | 12 | 50 | 4 | Select |
| 2COR 010 002 160 | 1 x R0.2 | 1.5 | 16 | 50 | 4 | Select |
| 2COR 010 002 200 | 1 x R0.2 | 1.5 | 20 | 50 | 4 | Select |
| 2COR 010 003 040 | 1 x R0.3 | 1.5 | 4 | 50 | 4 | Select |
| 2COR 010 003 060 | 1 x R0.3 | 1.5 | 6 | 50 | 4 | Select |
| 2COR 010 003 080 | 1 x R0.3 | 1.5 | 8 | 50 | 4 | Select |
| 2COR 010 003 100 | 1 x R0.3 | 1.5 | 10 | 50 | 4 | Select |
| 2COR 010 003 120 | 1 x R0.3 | 1.5 | 12 | 50 | 4 | Select |
| 2COR 010 003 160 | 1 x R0.3 | 1.5 | 16 | 50 | 4 | Select |
| 2COR 010 003 200 | 1 x R0.3 | 1.5 | 20 | 50 | 4 | Select |
