Description
3 Flutes 45 Helix Rib Corner Radius End Mills for Copper
- Endmills for copper, copper alloy, nonferrous and nonmetallic materials.
- JCRO coating provides wear resistance improvement as well as avoid edge stress in various applications.
- High speed, feed applicable by 3 flute 45 degree helix and deep chip pocket design.
- Minimize fracturing by high TRS fine(0.5μm) WC grade.
Download technical specifications.pdf
Part Number | Diameter | Length of Cut | Effective Length | Overall Length | Shank Dia | Select Part |
D x R | L1 | L2 | L | d | ||
3COR 010 001 030 | 1 x R0.1 | 1.5 | 3 | 45 | 4 | Select |
3COR 010 001 060 | 1 x R0.1 | 1.5 | 6 | 45 | 4 | Select |
3COR 010 001 100 | 1 x R0.1 | 1.5 | 10 | 45 | 4 | Select |
3COR 010 002 030 | 1 x R0.2 | 1.5 | 3 | 45 | 4 | Select |
3COR 010 002 060 | 1 x R0.2 | 1.5 | 6 | 45 | 4 | Select |
3COR 010 002 100 | 1 x R0.2 | 1.5 | 10 | 45 | 4 | Select |