Description
2 Flute Taper Ball Nose End Mills
- Endmills for pre-hardened and hardened steel (HRc50~) Excellent wear resistance from Si-based PVD coating.
- High precise edge tolerance.
- Excellent work surface finish.
- Minimize fracturing by high TRS fine(0.5μm) WC grade.
Download Technical Specification .pdf
| Part Number | Diameter | Angle | Length of Cut | Overall Length | Shank Dia |
| R x D | L1 | L | d | ||
| 2CTB010003030 | 0.5R x 1 | 0°30 | 3 | 40 | 4 |
| 2CTB010010030 | 0.5R x 1 | 1° | 3 | 40 | 4 |
| 2CTB010013040 | 0.5R x 1 | 1°30 | 4 | 40 | 4 |
| 2CTB010020040 | 0.5R x 1 | 2° | 4 | 40 | 4 |
| 2CTB010030040 | 0.5R x 1 | 3° | 4 | 40 | 4 |
| 2CTB010040060 | 0.5R x 1 | 4° | 6 | 45 | 4 |
| 2CTB010050060 | 0.5R x 1 | 5° | 6 | 45 | 4 |
| 2CTB010070060 | 0.5R x 1 | 7° | 6 | 45 | 4 |
| 2CTB010100060 | 0.5R x 1 | 10° | 6 | 45 | 4 |
| 2CTB010150056 | 0.5R X 1 | 15° | 5.6 | 45 | 4 |
Extra Information
Brand:
JJ Tools
Diameter (R x D):
0.5R x 1mm
Angle:
0°30,1°,1°30,2°,3°,4°,5°,7°,10°,15°
Length of Cut (L1):
3mm - 6mm
Overall Length (L):
40mm, 45mm
Shank Dia (d):
4mm
