Description
4 Flutes Rib End Mills for SUS
- Endmills for alloy steel, SUS, Ti/Ni base alloy, Inconel and hard to cut materials.
- JCRO coating provides wear resistance improvement as well as avoid edge stress in various applications.
- Minimize chattering by unequal flute spacing design.
- Excellent work surface finish by 4 flute and deep chip pocket.
- Minimize fracturing at high feed by high TRS fine WC grade.
Download technical specification .pdf
| Part Number | Diameter | Length of Cut | Effective Length | Overall Length | Shank Dia | Select Part |
| D | L1 | L2 | L | d | ||
| 4SURE 010 030 S04 | 1 | 1.5 | 3 | 50 | 4 | Select |
| 4SURE 010 050 S04 | 1 | 1.5 | 5 | 50 | 4 | Select |
| 4SURE 010 060 S04 | 1 | 1.5 | 6 | 50 | 4 | Select |
| 4SURE 010 080 S04 | 1 | 1.5 | 8 | 50 | 4 | Select |
| 4SURE 010 100 S04 | 1 | 1.5 | 10 | 50 | 4 | Select |
