Description
4 Flute Standard Length End Mills for Steel
- Endmills for pre-hardened and hardened steel(HRc50~60)
- Good wear resistance by Si-based PVD coating.
- High precise edge tolerance.
- Reinforced edge design for preventing edge chipping.
- Minimize fracturing by high TRS fine(0.5μm) WC grade.
Download Technical Specification .pdf
| Part Number | Diameter | Length of Cut | Overall Length | Shank Dia |
| D | L1 | L | d | |
| 4HCE010025060 | 1 | 2.5 | 60 | 6 |
| 4HCE010025080 | 1 | 2.5 | 80 | 6 |
| 4HCE010025S03 | 1 | 2.5 | 40 | 3 |
| 4HCE010025S04 | 1 | 2.5 | 40 | 4 |
| 4HCE010025S06 | 1 | 2.5 | 40 | 6 |
Extra Information
Brand:
JJ Tools
Diameter (D):
1mm
Length of Cut (L1):
2.5mm
Overall Length (L):
40, 60, 80mm
Shank Dia (d):
3, 4, 6mm
