4 Flutes Variable Helix End Mills for SUS
- Endmills for alloy steel, SUS, Ti/Ni base alloy, Inconel and hard to cut materials.
- JCRO coating provides wear resistance improvement as well as avoid edge stress in various applications.
- Minimize chattering during cutting application by unequal index of flute and helix angle to the endmill edge.
- Type A minimizes chipping, Type B maximizes chip emissions.
- Minimize fracturing at high feed by high TRS fine WC grade.
|Part Number||Diameter||Length of Cut||Effective Length||Chamfer Type||Overall Length||Shank Dia|
|4SUVA 020 050 S04||2||5||-||A||50||4|
|4SUVB 020 050 S04||2||5||-||B||50||4|
|4SUVA 020 120 S04||2||5||12||A||50||4|
Length of Cut (L1):
Effective Length (L2):
Overall Length (L1):
Shank Dia (d):