Description
4 Flutes Rib End Mills for SUS
- Endmills for alloy steel, SUS, Ti/Ni base alloy, Inconel and hard to cut materials.
- JCRO coating provides wear resistance improvement as well as avoid edge stress in various applications.
- Minimize chattering by unequal flute spacing design.
- Excellent work surface finish by 4 flute and deep chip pocket.
- Minimize fracturing at high feed by high TRS fine WC grade.
Download technical specification .pdf
| Part Number | Diameter | Length of Cut | Effective Length | Overall Length | Shank Dia | Select Part |
| D | L1 | L2 | L | d | ||
| 4SURE 030 090 S06 | 3 | 4.5 | 9 | 60 | 6 | Select |
| 4SURE 030 120 S06 | 3 | 4.5 | 12 | 60 | 6 | Select |
| 4SURE 030 160 S06 | 3 | 4.5 | 16 | 60 | 6 | Select |
| 4SURE 030 200 S06 | 3 | 4.5 | 20 | 60 | 6 | Select |
| 4SURE 030 250 S06 | 3 | 4.5 | 25 | 65 | 6 | Select |
| 4SURE 030 300 S06 | 3 | 4.5 | 30 | 70 | 6 | Select |
