Description
4 Flute Rib Taper End Mills
- Endmills for pre-hardened and hardened steel(HRc50~)
- Good wear resistance with Si-based PVD coating.
- Optimum for deep grooving.
- High precise edge tolerance.
- Excellent work surface finish.
- Minimize fracturing with high TRS fine(0.5μm) WC grade.
Download technical specification .pdf
| Part Number | Diameter | Angle | Length of Cut | Overall Length | Shank Dia |
| D | L1 | L | d | ||
| 4RTE012030080 | 1.2 | 0°30 | 8 | 45 | 4 |
| 4RTE012030100 | 1.2 | 0°30 | 10 | 45 | 4 |
| 4RTE012030120 | 1.2 | 0°30 | 12 | 45 | 4 |
| 4RTE012030160 | 1.2 | 0°30 | 16 | 50 | 4 |
| 4RTE012045080 | 1.2 | 0°45 | 8 | 45 | 4 |
| 4RTE012045100 | 1.2 | 0°45 | 10 | 45 | 4 |
| 4RTE012045120 | 1.2 | 0°45 | 12 | 45 | 4 |
| 4RTE012045160 | 1.2 | 0°45 | 16 | 50 | 4 |
| 4RTE012100080 | 1.2 | 1° | 8 | 45 | 4 |
| 4RTE012100100 | 1.2 | 1° | 10 | 45 | 4 |
| 4RTE012100120 | 1.2 | 1° | 12 | 45 | 4 |
| 4RTE012100160 | 1.2 | 1° | 16 | 50 | 4 |
Extra Information
Brand:
JJ Tools
Diameter (D):
1.2mm
Angle:
0°30, 0°45, 1°
Length of Cut (L1):
8mm, 10mm, 12mm, 16mm
Overall Length (mm):
45mm, 50mm
Shank Dia (d):
4mm
