7.0mm - 7.9mm Carbide Drills Without Coolant - DC150 3xD

£34.36 inc. VAT
£28.63 ex. VAT


Solid Carbide Twist Drills - Walter Titex DC150 Perform Range

Part Number Description Diameter (Dc) " Length (Lc) Length (l2) Overall Length (l1) Shank Dia (d1)
WAL6618110 DC150-03-07.000A0-WJ30RE 7.0mm   24mm 34mm 79mm 8mm
WAL6618111 DC150-03-07.100A0-WJ30RE 7.1mm   29mm 41mm 79mm 8mm
WAL6618112 DC150-03-07.144A0-WJ30RE 7.144mm 9/32" 29mm 41mm 79mm 8mm
WAL6618113 DC150-03-07.200A0-WJ30RE 7.2mm   29mm 41mm 79mm 8mm
WAL6618114 DC150-03-07.300A0-WJ30RE 7.3mm   29mm 41mm 79mm 8mm
WAL6618115 DC150-03-07.400A0-WJ30RE 7.4mm   29mm 41mm 79mm 8mm
WAL6618116 DC150-03-07.500A0-WJ30RE 7.5mm   29mm 41mm 79mm 8mm
WAL6618117 DC150-03-07.541A0-WJ30RE 7.541mm 19/64" 29mm 41mm 79mm 8mm
WAL6618118 DC150-03-07.600A0-WJ30RE 7.6mm   29mm 41mm 79mm 8mm
WAL6618119 DC150-03-07.700A0-WJ30RE 7.7mm   29mm 41mm 79mm 8mm
WAL6618120 DC150-03-07.800A0-WJ30RE 7.8mm   29mm 41mm 79mm 8mm
WAL6618121 DC150-03-07.900A0-WJ30RE 7.9mm   29mm 41mm 79mm 8mm
WAL6618122 DC150-03-07.938A0-WJ30RE 7.938mm 5/16" 29mm 41mm 79mm 8mm

  • ISO material groups P, M, K, N, S, H, O
  • Can be used with emulsion, oil
  • Areas of use: General mechanical engineering, mould and die making, energy and automotive industries
  • Solid carbide twist drill
  • Grades: WJ30RE and WJ30TA
  • 140° point angle
  • Dia. 1.5–20 mm

Download Technical Specification .pdf


Extra Information

Walter Titex
Diameter (Dc):
7.0mm - 7.9mm
Shank Diameter (d1):
Without Through Coolant